|
Useful solution for the owners of weekend houses, bungalows, boats, campers!
May be this is a new market for you, but we have a security solution which can be interesting for this customers.
They can turn off the electricity when they leave the location and the alarm system will still working with the full control of the object.
Wilarm-4 GSM module is designed to work together with solar systems. Its extremely low current consumption - about 15mA - and built-in lithium-polymer battery, ensures high up time even in case of external power loss. Module monitors the external power voltage and alerts the user if it goes down.
|
|
|
|
|
Inputs
4 inputs can be configured separately. You can set up to 8 phone numbers for them. Inputs must be connected as Normal Close (NC) default, during alarm must be released. This operation can be reversed setting “inverting input” function (only with PC programming). |
|
|
|
|
|
Outputs
Two relay output, which gives you a Normal Open (NO) default. This can be inverted using the jumper (NC/NO select) on the panel to have a Normal Close (NO) output. The relay can be loaded maximum 30Volts DC / 1 Ampere. To switch a mains network (230 Volts) an external relay must be connected. |
|
|
|
|
|
Voice calling in case of alarm
You can set up to 8 phone numbers to call. After alarm, the module first sends the SMS notifications, and then calls the preset phone numbers, until one of the notified persons answers the phone. If you are using circular call function, all of the persons must answer the phone. |
|
|
|
|
|
SMS sending in case of alarm
You can set up to 8 phone numbers to send SMS after alarm to. An option can be set, to send SMS even if the alarm stops on the input. Then before the text of the message „Setback” will appear. |
|
|
|
|
|
Life signal
With this function you can control, if the module works correctly. The practical set is 7 days, so the module will send one life signal SMS weekly. You can set it with a PC for the 8 preset phone numbers. |
|
|
|
|
|
Caller number identification (CallerID)
The numbers, stored on the SIM card can be set to accept for caller number identification. You can edit these numbers with your mobile phone or with PC using WilarmRead software. With this function you can control the preset output of the module or activate/deactivate of the properly configured inputs. |
|
|
|
|
|
SMS redirection
Using this function one phone number can be set to redirect SMSs, those that module cannot interpret. For example using prepaid SIM cards, messages about balance. |
|
|
|
|
|
SMS sending in case of power failure
Module will send SMS message to preset phone numbers, if input power falls below 7 Volts. User can set also restore message, if power voltage restores and above 8 Volts. |
|
|
|
|
|
Temperature monitoring and alarm
Built-in temperature sensor measures with 2ºC accuracy and can be programmed to alert the user or even pull relay if module temperature exceeds preset values. |
|
|
|
|
|
Solar + charger + console
The solar panel, depending on weather conditions generates 17-21 Volts. Its maximal power is 20 Watts. The intelligent charger module optimizes the drawed energy to have maximal charge current for the lead-acid battery. The system charges directly the security system’s battery. |
|
|
|
|
|
Extremely low current consumption
You have to put a 15Ah battery to the charger to have the maximum charging capacity of the solar. According to the Wilarm-4's power consumption, mean, it can operate for about 30 days without any solar charging . (The calculation do not included the power consumption of the external accessories) |
|
|
|
|
|
Warranty
For the Solar system and the Wilarm-4 we are giving 3 years warranty! |
|
|
