The W-ContactID GSM module transmits the signals of an alarm system to the monitoring centre. Installer can connect it to the alarm system?s phone output. The panel contains a network independent quad-band industrial GSM transceiver and a complete telephone simulation circuitry, which generates 48V line voltage according to the industrial standards. After installation module can be setup using a PC.
- Telephone line emulator
- PSTN line management, PSTN fail relay output (NC/NO)
- SIA FSK and CONTACT ID protocols
- Programmable through SMS
- The interface IT-GSM makes use of an integrated GSM module that simulates a traditional phone line (PSTN line).
- It can be used in case of not available PSTN wired telephone line or when a telephonic back-up system is required.
- A telephonic back-up system is able to guarantee the execution of a phone call and simulate a PSTN phone line in case of not availability of the PSTN wired telephone line by using the GSM network.
- The IT-GSM makes use of an integrated GSM module to simulate a traditional phone analog line (PSTN line).
- It can be used to back-up an analog line so as to guarantee the execution of a phone call when the line is sabotaged or not working.
- It can also be used where an anlog line is not available. It is also possible to force outgoing calls on GSM network.
- This system is able to generate a ring during the reception of a GSM call. (As IT-GSM. Power Supply 230Vac.)
- Telephone line emulator
- PSTN line management
- BELL103 / V.21 modem simulation
- Programmable through USB
